POWER ACOUSTIK FUBR-10 vs Cerwin Vega V Max 10.2

[getonerd]

in my quest i make a sub box to look like a tire i decide to get a 10 inch sub so i need something that need at least 600 RMS and a sealed box .5 to .85 cu ft

so i narrow it down 2 these 2

FUBAR-10W


600 Watts RMS
SPL 90 dB
Fs: 36.8 Hz
Vas: 0.99 cu.ft.
Qms: 4.86
Qes: 0.51
Qts: 0.462
Xmax: 0.4"
Sealed box: 0.75 cu. Ft.

VMAX-10.2

SPL 86.1
600 Watts RMS
Fs: 34 Hz
Qts: 0.5
Qms: 4.1
Qes: 0.57
Vas: 0.52 ft
Xmax: 17mm
Revc: 1.32 ohms / coil
Sealed Box: 0.42 ft
i thinking using these specs
Diameter:17.75 in
Height:6.5 in
that should give me .6 cu ft i think

any and all good suggestions on which one or a better 10 in sub
its going in a 2002 blazer 2dr


SONY XM-D9001GTR is the amp will be using to push the sub at 4 ohms(550 RMS)

[powerpunchhx2]

go vmax