Box design for 10" Fi SSD

[IonSQL]

This is a design I put together for billabongcr on ca.com.

Will be housing a 10" Fi SSD... I think 80% of all designs I've done in the last month have been for Fi subs lol

25" wide x 11" deep x 18.25" high... 1.5cf tuned to 38Hz. 24 sq in of port area

Needed the sub and port up but only had 11" depth, so we're using a double sub baffle to give more wood area to screw into.

Here we go:

[Decado]

If his SSD is anything like my BL, you may want to open up the cut out a little more than FI suggest's.

My BL JUST fits into the cutout FI recommended, the basket is huge and the push terminals scratch the cutout when I dropped it in.

When I went to remove the sub, it was stuck! After removing all the screws I had to flip the box over and pound on the back to unseat the sub from the cutout.

Note to self: Dont plan on removing the subs often once they are installed

[Decado]

Oh, forgot to say, nice design! And FI does seem to be the sub of choice these days.

[99GTXGOLFER]

aww thatll be cute

[Andy Heath]

Nice of you to finally make it over here snookums