4000 watts rms at 1 ohm

---

4000 watts rms at 1 ohm
2000 watts rms at 2 ohm
1000 watts rms at 4 ohm

1800x1 @ 1 ohm Linkable Mono Block Amplifier

---

Features:
Power Ratings:
1800 watts x 1 at 1 ohm
900 watts x 1 at 2 ohms
450 watts x 1 at 4 ohms
Strapable Pair: 3600 watts x 1 at 2 ohms

Protection Circuit3 Way (Overheat, Overload, Short Circuit)

Frequency response 10Hz~350Hz
Signal/Noise Ratio 105dB
T.H.D @ 4 Ohm < 0.05%
Efficiency @ 4 Ohm 87%
Low Pass Filter 45Hz~300Hz
Subsonic Filter 20Hz~50Hz
Bass Boost Slope 0~18dB
Size: 10.25" Wide x 2.25" Height x 21.75" Long

4 CHANNEL AND MONO AMP DC360.4 & DC500.1

---

50 WATTS X 4 WITH DIGITAL SOUND PROCESSING
500 WATTS X 1 WITH DIGITAL SOUND PROCESSING

---

237 watts RMS x 2 channels at 4 ohms
and ≤1% THD + N

718 watts RMS x 1 channel at 4 ohms,
14.4V supply and ≤1% THD + N

674 watts RMS x 1 channel at 1 ohm,
14.4V supply and ≤1% THD + N
Signal-to-Noise Ratio 66.4 dBA (reference 1 watt into 4 ohms)
Dynamic Power 790 watts at 4 ohms
Effective Damping Factor 6.187 at 4 ohms
Frequency Response 25.4Hz – 340Hz (-3dB)
Maximum Input Signal 6.2 V
Maximum Sensitivity 280 mV
Output Regulation .28 dB at 4 ohms
Dimensions (H x W x D) 13" x 2-9/16" x 12-1/4"

Great amp

---

# Amplifier Type: Mono
# RMS Power: 787W x 1 @ 4 Ohms
# 1200RMS@2ohm
# THD at 4-Ohm RMS Power: <1 %
# RMS Power: 1114W x 1 @ 2 Ohms
# Speaker Level Inputs: Yes
# Preamp Outputs: Yes
# Built-In Crossovers: LP
# Bass Boost: 0 - 12 dB
# Frequency Response: 10-320 Hz
# Signal to Noise Ratio: 70 dB
# Fuse Rating: n/a
# High-Efficiency Class D Topology
# "Direct Connect" Terminal Block Allows for 4 or 8 Gauge Power Wire
# Paralleled Dual Speaker Outputs
# Die-Cast Aluminum Chassis with Top Plexiglas Viewing Window
# Variable Low-Pass Crossover (32-320 Hz)
# 12 dB / Octave Crossover Slope
# Variable 12 dB Bass Boost
# High and Low-Level Inputs
# Preamp Outputs
# Optional Remote Level Control
# New! Pro Style Speaker Terminal Blocks
# Fully CEA-2006 Compliant Power Ratings

long

---

1000W @ 1 ohm

---

1500 @ 1... 1,000,000 @ 0.5

2 channel amplifier

---

# 2-Channel ZX-Series Power Amplifier
# Low Impedance Operation
# SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity, Thermal)
# MOSFET Power Supply
# KickBass: 0-12 dB @ 40 Hz
# Built-In Electronic Crossover: 12 dB High or Low-Pass operation (80 Hz)
# High & Low level inputs
# Custom tooled gold plated connectors
# SAMS (Stereo And Mono Simultaneously) bridged mono load and a stereo load at the same time
# Cast Aluminum EndKaps
# RMS Power Ratings:

* 70 watts x 2 chan. @ 4 ohms
* 100 watts x 2 chan. @ 2 ohms
* 200 watts x 1 chan. @ 4 ohms

# Input gain control: Low Level (125mV - 5V), High Level (250mV - 10V)

1200 Watt Linkable Mono Block Amplifier

---

Max Power 2400
4 Ohm Rating 425 x 1
2 Ohm Rating 800 x 1
1 Ohm Rating 1200 x 1
Mono Rating -
Freq. Resp. 20Hz - 250Hz
THD+N < 1%
Damping factor > 50
Signal to noise ratio -57dBA
Crossover range/scope LP 30 - 250hz 12/24 db octave
Input sensitivity 200mV - 5V
Safe load impedance 1 ohm
Equalization Circuit Intelli Q 10 db
Remote level control Included
Amplifier protection* T,D,R,S,O
Externally Bridgeable Yes
Dimensions** 12.6” x 10.2” x 2.4”

---

2 channel