ay 80, i need some cut sheets

[jk audio]

i need cut sheets for...
(6) 11" x 14"
(6) 18 3/4" x 12.5"
(4) 18 3/4" x 11"
(3) 14" x 17"
(2) 18 3/4" x 17"

that is all the wood i need, to build my three boxes

[80INCHES]

im lost alittle...what kind of boxes r these and wat the outer dimensions r for the boxes

80

[jk audio]

im sry, if i listed what i needed weird... ok so basically my boxes are 14x17x21, 14x11x21, and another 14x11x21 (external dim. heightxwidthxdepth) the list i made on my original post were the pieces i need to build my three boxes so like...
(6 pieces) 11" x 14"
(6 pieces) 18 3/4" x 12.5"
(4 pieces) 18 3/4" x 11"
(3 pieces) 14" x 17"
(2 pieces) 18 3/4" x 17"

the boxes are goin to be ported i already got that stuff figured out, and have the ports sitting right here next to me, all 4" PVC with flared ends. the bigger of the boxes is for my 12" infinity 12dVQ, and the 2 smaller boxes are for my 2 10" infinity 104.7w. the three boxes will sit side by side underneath my rear deck in my trunk between the wheel wells, with the 12 in the middle and the 10s on the sides

oh and the reason there are extra pieces is because im goin to make the front of the boxes a double baffle

[80INCHES]

whoa...so u going to use 2 10's and 1 12 for bass?
if so thats a no no....just use the 1 12...slap that in a 2cubes tuned to 35hz and u will be more than happy plus u will save a room in ur trunk and u can still use ur 4 inch pvc ports with the flared ends

80

[jk audio]

hahaha, well i cant say i havent heard that before, ok w.e, nvm then...

[Lance_aka_64]

lolz