ported box

[tigerh4rf]

yo 80 whas up well its me again box u designed for the rf 8 10's couldnt make it fit not your fault my dumb azz measuring could u help me out with another design for the 8 rf 10's if u to busy i understand to. but if you descide to help me out max demensions are higth is 34 width is 44, deep is 48 can go higher if you need to but would like to keep it at 48 if possible would like to tune to 43 hz really want to hear one of your bp boxes thanks for your help and time if u to busy just send a message i do understand u have a family and job like i do anyway thanx for time and for the help on last design craig later bro.

[80INCHES]

i will work on it 2nite so u can have it 2morrow

80

[tigerh4rf]

you da man 80 swweeett u think u could design with max depth at 47.25 i have a lot of spare wood at that size i could use so i dont have to buy new wood but if not i can live with 48 that cool 80 if my res. frerquency is 53 where should i tune it to make it really loud should i tune at 53 or should i tune at 43 and look for the peak output at 53 jus looking to really loud on the meter looking for 150's if possible anyway thanx for the help i could not do it with out your help i really do thank you craig.

[80INCHES]

u should have the design in about an hour
and hitting 150 is possible with ur equipment...i would tune to box to around 45hz
but u will be fine


80