crx style box for 2 L7 15's

[rfcivic74]

you designed me a box for 4 8's which will probably be used in my wifes car. Now i am running 2 L7 15's with 2 Crossfire vr1000ds. I wanted to see what kind of design you could come up with. Car is daily driver and was just going to build a crx style box with box subs up and 1 big port to the rear. I think i need 9-10 Cubic ft for both subs. Box can be no wider than 35"W, 19"H, and 36"D. I had 2 L7 15's in a couple downfiring with 4.5 cubes per side tuned to like 35hz. I want this one tuned around 32-35 also, because i probably wont compete ever unless local show. Its just my work car. thanks. just let me know what you think

[sutterkain]

i think thats too large personally

[80INCHES]

its not to big ...unless he wants his lows to have alot of authority
but the box was 7cubes with 120 square inch port he should be fine

80

[rfcivic74]

remeasured and can be 35" W, 22"H, and 40" D. does that sound better for airspace after sub and port displacement?thanks
the subs call for like 4-6 cubes per sub.

[sutterkain]

Originally Posted by 80INCHES

its not to big ...unless he wants his lows to have alot of authority
but the box was 7cubes with 120 square inch port he should be fine

80

thats more along the lines of what i would suggest

[80INCHES]

well i just finish
working things out
i got up 8cubes with 110 square inches of port(5high x 22wide) 16inches long tuned to 35hz
that should be loud
the box is 35wide x 18high x 33 deep

80

[rfcivic74]

cool. just let me know when to send you payment and whenever you can send me plan. Could i build that size and put subs up and port back? thanks

[rfcivic74]

ok, i bought some 3/4" mdf, and will start saturday before i go to work. Im going to double baffle the top. Im just going to put the port facing the back of car, at the bottom of the box, and place in the middle with it 22" across 5" high, will that be ok or does it need to go up in the middle facing back? thanks and sorry for so many questions. i just hope i dont have to take it out to build another.

[80INCHES]

Originally Posted by rfcivic74

ok, i bought some 3/4" mdf, and will start saturday before i go to work. Im going to double baffle the top. Im just going to put the port facing the back of car, at the bottom of the box, and place in the middle with it 22" across 5" high, will that be ok or does it need to go up in the middle facing back? thanks and sorry for so many questions. i just hope i dont have to take it out to build another.

u will have the box design 2nite.where the port go middle is fine....keep in mind the subs are sharing the air space
and as far payment info it will be included in the design

80

[rfcivic74]

thats cool. thanks